cure-o-matic_5000
Cure-O-Matic 5000
| Name | Cure-O-Matic 5000 |
|---|---|
| Owner | Makers' Alliance |
| Location | 3D Printing |
| Training needed | No |
| Hackable | No |
| Model | UNKNOWN |
| Serial | UNKNOWN |
| Arrival Date | UNKNOWN |
| Working | Yes |
| Contact | Ian KM |
Current Status: Fully Functional
A microwave oven that was modified into a UV curing station for SLA prints.
The Magnetron was removed and replaced with a 120V UV lamp.
To use: place the object on the turntable, and set the time needed for curing, and press start. The object will turn on the turntable and get an even exposure to the UV.
cure-o-matic_5000.txt · Last modified: by sdh7